FMT100

FMT100

Special and small waterproof GNSS tracker with build-in accelerometer and gyroscope.

Technology
  • Blue-tooth
  • SMS
  • GPRS
  • GNSS
Hardware
  • Battery
  • Internal GNSS antenna
  • Internal GSM antenna
  • 128MB memory
Firmware
  • Voice call
  • Crash detection
  • Idling detection

Compare products
(Compare 2 or up to 4 products)

Product Description

Teltonika FMT100 smart waterproof GNSS tracker with Blue-tooth connectivity and internal backup battery. Solid waterproof case and build-in accelerometer & gyroscope sensors with extremely accurate crash trace functionality makes this device perfectly suitable for insurance market solutions.

Gyroscope

Combined accelerometer & gyroscope

Build-in accelerometer and gyroscope sensors with extremely accurate crash trace functionality makes FMT100 perfectly suitable for insurance market solutions.

Fast-easy

Fast & Easy mounting

The biggest high gain GNSS antenna in all FM series devices allows mounting FMT100 device directly on car battery under the hood. For faster and easier mounting FMT100 case is equipped with mounting tape and special clamp connectors for power cable connection to the car battery.

Smart Crash detection icon

Smart Crash detection

Ensure safety of Your employee with smart Crash detection. Get alarm message immediately after accident, save workers life!

Bluetooth icon

Blue-tooth

Integrated Blue-tooth 4.0 BLE allows usage of  various wireless sensors and  grants compatibility with previously available Blue-tooth V3.0 features like device configuration, firmware update, headset support. Retrieve temperature and humidity information from Blue-tooth sensors without the need of wired connection – reduce installation costs. Make phone calls to your employee via Blue-tooth headset – be sure that your employee is always safe and uses hands free headset instead of phone!

Advanced antitheft system icon

Advanced antitheft system

Prevent your vehicle from theft with advanced antitheft functionality. Combine Auto Geofencing with new Towing detection functionality.

FMT100 scheme

  • TECHNOLOGY

  • GNSS i Global positiong system/Global Navigation Satellite System.
  • GPRS i General Packet Radio Service (GPRS) is a packet oriented mobile data service based on the 2G technology.
  • SMS i Short Message Service (SMS) is a text messaging service component.
  • Blue-tooth i Blue-tooth is a wireless technology standard for exchanging data over short distances.
  • HARDWARE

  • 1x micro SIM card; 1x eSIM i Dual-SIM functionality can be achieved with one micro card and one soldered SIM chip.
  • 128MB memory i Internal memory for records storing when there is no GPRS connectivity.
  • Internal GSM antenna i An antenna used for GSM connectivity. Integrated into device PCB. Does not have external connector.
  • Internal GNSS antenna i An antenna used for GPS connectivity. Integrated into device PCB. Does not have external connector.
  • Battery – 170mAh Li-ion 3,7V i Allows device to work without external power source
  • IP65 i Protected from total dust ingress, low pressure water jets from any direction.
  • 10 - 30V i External voltage range
  • Overvoltage protection i Protects device from voltage jumps till 90V
  • USB 2.0 Interface i Device accessible and configurable via USB
  • Accelerometer & Gyroscope i Accelerometer and gyroscope allows device to indicate movement and save accurate crash trace data
  • FIRMWARE

  • NITZ time synch. i Network Identity and Time Zone (NITZ) is a mechanism for provisioning local time and date, time zone and DST offset, as well as network provider identity information, to mobile devices via a wireless network.
  • Configuration over Blue-tooth i Configuration over Blue-tooth gives ability to configure the device remotely by using Blue-tooth connection.
  • Ignition detection i A vehicle ignition detection function, based on a configured ignition source (External power voltage, Digital input 1 or Movement).
  • Geo-fence i A functionality, which generates an event when crossing a defined area. It can be used to detect wherever car enters or leaves customized areas
  • Sleep modes i Power saving modes which allow devices to reduce consumption and save internal or vehicle battery.
  • Overspeeding detection i This scenario helps to prevent from exceeding fixed speed and inspects driver if needed. Digital output 1 is controlled by scenario for user needs, to manage buzzer, LED etc. During overspeeding event Digital output 1 will be turning ON and OFF until speed is lower than configured Max Allowed Speed.
  • FOTA i Firmware over the air solution. The software is used to send firmware/configuration to device via GPRS network.
  • Remote Log i This type of FM data logging is used when there is no possibility to connect to device physically. Device establishes GPRS connection and activates link to server, log is started to stream to server until set time is elapsed.
  • GPRS commands i It is possible to send commands to device using GPRS. GPRS commands can be used for sending configuration, debug, digital outputs control commands etc. These commands should be coded into a special codec12 format.
  • Eco driving i This scenario helps to prevent and inspect driver about harsh driving. Eco driving scenario continuously monitors: accelerating, braking and cornering forces depending on build in accelerometer. Monitoring sensitivity is configurable.
    FM device Digital Output 1 is controlled by scenario for user needs, buzzer or LED for example.
  • Green driving i Helps to prevent and inspect driver about harsh driving. This functionality works in parallel with accelerating force, braking force and cornering angles. Every harsh drive event can be presented in the real time during the LED or buzzer notification.
  • Jamming detection i Jamming detection informs the driver with buzzer or LED about radio jamming events.
  • NTP time synch. i Network time protocol (NTP) is used to get the right time without GPS connection. This functionality gives an ability to monitor the device state in the real time.
  • SMS event i SMS event is a special functionality which is used to notify the user about the tracker initial state. Any changes of speed, engine status, over speeding or etc. will be informed with SMS.
  • Idling detection i The Idling detection functionality allows User to monitor the engine working time without initial speed.
  • Crash detection i Crash detection functionality is generating the record when device detects car accident using the internal sensors (Accelerometer).
  • Odometer i Odometer is used to calculate traveled distance and produce this information directly to server.
  • Trip detection i Trip detection is used to inform user about start and stop points in the dedicated location, while engine is on or off.
  • Towing detection i Towing detection feature helps to inform the User about car deporting. The quick event will be sent to server while towing is detected.
  • Integrated scenarios i The integrated device scenarios are used to simply enable the dedicate functionality like Green driving, Over speeding, Authorized driving or Immobilizer.
  • Remote configuration over SMS i The remote configuration via SMS gives an ability to configure the device via SMS
  • Offline tracking i Offline tracking is used to track the object position while GPRS is not activated.
  • Auto Geofencing i This functionality creates a virtual zone around the device when ignition is OFF and activation timeout passes. If the object is taken away while ignition is OFF an autogeofencing event is generated.
  • Voice call i The voice call functionality gives an ability to make a directly phone call with device.

Technical details

GSM/GPRS features:

  • Quad-band 900/1800 MHz; 850/1900 MHz
  • GPRS Multi-Slot Class 12(up to 240 kbps)
  • GPRS Mobile Station Class B
  • SMS (text/data)

Blue-tooth:

  • Blue-tooth specification V3.0, 4.0
  • Blue-tooth transceiver fully compliant with Blue-tooth specification V3.0 for external peripherals:
    • Voice calls over Blue-tooth
    • Configuration via Blue-tooth
    • Blue-tooth sensors

GNSS:

  • Tracking: 33/ 99 acquisition channels
  • -165 dBM sensitivity
  • Hot start <1s
  • Warm Start < 25s
  • Cold start < 35s
  • NMEA-183 protocol
  • GPS, GLONASS, GALILEO, BEIDOU, SBAS, QZSS, DGPS, AGPS
  • Accuracy < 3m

Interface:

  • Built in accelerometer&gyroscope
  • Internal backup battery
  • Power supply (+10…+30) V DC with overvoltage protection
  • Internal High Gain GNSS antenna
  • Internal High Gain GSM antenna
  • Configuration and firmware upload (FOTA and via cable)

Features:

  • Dimensions 91x57x14 mm.
  • Fully controllable digital output via SMS and configurator
  • Ultra small and easy to mount in limited access areas case
  • Fast first GPS fix
  • Real Time tracking
  • Sending acquired data via GPRS (TCP/IP and UDP/IP protocols)
  • Smart algorithm of GPRS connections for GPRS traffic saving
  • Operating in roaming networks by preferred GSM providers list
  • Events from I/O elements detection and sending via GPRS or SMS
  • Auto Geofencing and T owing Detection for car theft prevention
  • Deep Sleep mode (less than 2 mA power consumption)
  • Firmware and configuration update via GPRS
  • Smart data acquisition mode
  • High Quality track even in high density populated urban areas or canyon
  • Color Ribbon undetachable cable
  • Easy to mount
  • High Gain internal GPS / GLONASS and GSM antennas
  • 2 status LED
  • Crash detection
  • Towing detection using accelerometer
  • Smart data acquisition based on:
    • Time
    • Distance
    • Angle
  • Ignition
  • Configurable using Secured SMS commands and configurator on PC

Downloads

Video

 

 

 

 

Order codes

FMT1001A9S01 order code contains

  • FMT100 tracker
  • Micro USB-USB cable
  • Power supply cable with special clamp connector (0.4m)