Teltonika RUT955


LTE (100Mbps / 50Mbps) dual SIM router with WiFi, 4x Ethernet ports, I/O, RS232, RS485, GPS

  • 4G (LTE)
  • Wi-Fi
  • GNSS
  • SMS
  • RS232
  • RS485
  • I/O connector
  • DIN Rail mounting
  • Backup WAN
  • Bridge mode
  • OpenVPN
  • RMS support

Compare products
(Compare 2 or up to 4 products)

Product Description

RUT955 is highly reliable and secure LTE router with I/O, GPS and RS232/RS485 for professional applications. Router delivers high performance, mission-critical cellular communication and GPS location capabilities. RUT955 is equipped with connectivity redundancy through dual SIM failover. External antenna connectors make it possible to attach desired antennas and to easily find the best signal location.

RUT955 Schema

RUT955 Package

Standard package contains

  • Router RUT955.
  • Euro PSU.
  • 2 x LTE antennas (magnetic mount, SMA male, 3 m cable).
  • 2 x WiFi antennas (magnetic mount, RP-SMA male, 1.5 m cable).
  • GPS antenna (adhesive mount, SMA male, 3 m cable).
  • DIN rail mounting kit.
  • RS485 connector block.
  • I/O connector block.
  • Ethernet cable (1.5 m).
  • QSG (Quick Start Guide).
  • Packaging box.

  • 4G (LTE) –Up to 100 Mbps i Long-Term Evolution (LTE) is a standard for high-speed wireless communication for mobile phones and data terminals.
  • 3G –Up to 42 Mbps i 3G is the third generation of wireless mobile telecommunications technology.
  • 2G –Up to 236.8 kbps i General Packet Radio Service (GPRS) is a packet oriented mobile data service based on the 2G technology.
  • GNSS i Global positiong system/Global Navigation Satellite System.
  • Wi-Fi –Up to 300 Mbps i Wi-Fi is a technology that allows electronic devices to connect to a wireless with 2.4GHz radio frequency signal
  • Ethernet –4 ports i Ethernet is widely used local area network (LAN) technology for interconnecting computers in a limited area such as a home, school, computer laboratory or office building.
  • SMS i Short Message Service (SMS) is a text messaging service component.

  • RS232 i RS-232 is a standard for serial communication transmission of data
  • RS485 i RS-485 is a standard defining the electrical characteristics of drivers and receivers for use in serial communications systems
  • Micro SD i Micro SD card slot for records storing when there is no GPRS connectivity.
  • 2x SIM Card (Dual-SIM) i Allows to put 2 SIM cards (can be from different operators) for internet connection
  • 3x LAN 10/100Mbps Ethernet ports i Device can host a network up to three wired networking devices. Ethernet ports speed is 100 megabits per second.
  • 1x WAN 10/100Mbps Ethernet ports i WAN port is used to connect to an internet source. Ethernet port speed is 100 megabit per second.
  • IEEE 802.11b/g/n Wi-Fi standards i Standarts for Wi-Fi technology: 802.11b - 11 Mbps standard, 2.4 GHz signaling; 802.11g - 54 Mbps standard, 2.4 GHz signaling; 802.11n - 100+ Mbps standard improvements over 802.11g
  • Durable aluminum housing i Device housing is made from aluminum material
  • Power consumption < 7W i Amount of energy consumed by the device is less than 7 watts
  • Operating temperature range -40°C to 75° C i Temperature range in which device can operate effectively
  • Storage temperature range -45ºC to 80º C i Temperature range at which the device can be safely stored when it is not powered.
  • Input voltage range 9-30 VDC i Voltage range by which device can be powered safely
  • DIN Rail mounting i Mounting kit which allows device mount on metal rail.
  • Wall mounting i Device panels have integrated flanges. With these panels router can be attached to various surfaces using screws or cable ties.
  • Wi-Fi speed Up to 300 Mbps i Wi-Fi provides wireless network communication over short distance. Interface speed up to 300 Mbps.
  • 0 - 3V digital input i Digital non-isolated input for passive sensors
  • 0 - 30V digital galvanically isolated input i Digital input with galvanic isolation
  • 0 - 24V analog input i Analog input is designed to measure analog voltages in the range of 0-24V and convert it to digital domain.
  • 30V, 250mA digital open collector output i Open collector (OC) output
  • 40V, 4A SPST relay output i Single Pole Single Throw (SPST) Relay output
  • USB A socket for external devices i USB interface which can be used to connect external devices to the router
  • 2 pin industrial DC power socket i Power connector with 2 pins (Power, Ground)
  • 1x bi-color connection status LED i Indicates status of the mobile connection
  • 5x connection strength LEDs i Connection LEDs indicates the mobile signal strenght on the device
  • 4x LAN status LEDs i LAN LED indicates the status of the wired connection
  • 1x Power LED i Power LED indicates status of the power plug connection
  • 4x LAN 10/100Mbps Ethernet ports
  • I/O connector

  • Remote configuration over SMS i The remote configuration via SMS gives an ability to configure the device via SMS
  • Bridge mode i Bridge mode lets end device to connect dirrectly to operator and receive IP address from it
  • Automatic and manual operator selection i Device can select network operator automaticly and manually
  • Static routes i Static routes can be configured on device
  • PPPoE i Point-to-Point Protocol over Ethernet. PPPoE is a specification for connecting the users on an Ethernet to the internet through a common broadband medium, such as DSL line, wireless device or cable modem.
  • NTP i Device internal clock can be sinchronized via internet with NTP (Network Time Protocol)
  • Wireless Hotspot i Device has Wireless Hotspot. Wireless hotspot is more advanced version of Wireless Access Point with more customizability
  • Wireless Client i Device can connect to another Access Point as a client (Wi-Fi WAN)
  • Wireless AP i Device can work as a wireless access point
  • Ping reboot i Device can take appropriate action if it cannot ping specific IP address
  • Periodic reboot i Device can be configured to restart periodically
  • Real-time graphs i Device can display realtime graphs, e.g. signal strength, connection count
  • Backup WAN i Backup WAN feature allows device to swtich to secondary internet source if primary one fails
  • Mobile Traffic counter i Device can display mobile traffic usage information
  • Connection status overview bar i All device information can be seen in one page (System information, network information, connection status, recent events)
  • Configuration backup/restore i Device configuration can be saved to file and uploaded to same or other routers
  • VRRP i Virtual Router Redundancy Protocol - an election protocol that dynamically assigns responsibility for one or more virtual router(s) to the VRRP router(s) on a LAN, allowing several routers on a multiaccess link to utilize the same virtual IP address.
  • IPSec i The IPsec protocol client enables the router to establish a secure connection to an IPsec peer via the Internet
  • GRE Tunnel i GRE (Generic Routing Encapsulation RFC2784) is a solution for tunneling RFC1812 private address-space traffic over an intermediate TCP/IP network such as the Internet. GRE tunneling does not use encryption it simply encapsulates data and sends it over the WAN.
  • OpenVPN i OpenVPN is an open-source software application that implements virtual private network (VPN) techniques for creating secure point-to-point or site-to-site connections in routed or bridged configurations and remote access facilities. It uses a custom security protocol that utilizes SSL/TLS for key exchange.
  • PPTP i Point-to-Point Tunneling Protocol (PPTP) is a protocol (set of communication rules) that allows corporations to extend their own corporate network through private over the public Internet.
  • L2TP i In computer networking, Layer 2 Tunneling Protocol (L2TP) is a tunneling protocol used to support virtual private networks (VPNs) or as part of the delivery of services by ISPs. It does not provide any encryption or confidentiality by itself.
  • SNMP i Simple Network Management Protocol - a set of protocols for managing complex networks. SNMP works by sending messages, called protocol data units (PDUs), to different parts of a network.
  • SNMP trap i Asynchronous notification from agent to manager. SNMP traps enable an agent to notify the management station of significant events by way of an unsolicited SNMP message
  • Send/receive SMS i Device can send and receive SMS messages
  • Status via SMS i Device status information can be received from device via SMS message
  • SMS reboot i Device can be restarted via SMS
  • 3G/4G enable/disable via SMS i Device's mobile connection (3G/4G) can be enabled or disabled via SMS message
  • Wireless on/off via SMS i Wireless device adapter can be controlled remotely via SMS
  • OpenVPN ON and OFF via SMS i Device's OpenVPN can be turned on or off via SMS message
  • Web Filter i Device can block specific host names or only allow users to access host names from the white list.
  • Mobile on Demand i Device can disconnect it's data connection after specified amount of time of inactivity. (Only use data when it is needed)
  • Mobile Data Limit i Device can stop providing internet access if mobile data limit is reached.
  • Configuration Profiles i Device can have several profiles with different configuration
  • Event logging i Device can log events, e.g.: leassed IP addresses, connections, system events, SMS messages
  • QoS i Quality of Service (QoS) is an advanced feature that prioritizes internet traffic for applications, online gaming, Ethernet LAN ports, or specified MAC addresses to minimize the impact of busy bandwidth
  • Restore point i Device's firmware and configuration can be downloaded as a single file and latter uploaded to router to restore both its previous firmware version and configuration
  • Call Utilities i Device can take action if it recieves a call. Actions: reboot, get status, turn Wi-Fi on/off, turn mobile data on/off, turn output on/off.
  • SIM switch i Device can switch active SIM automaticly if certain event occurs (Events: On weak signal, On data limit, On sms limit, On roaming, No network, On network denied, On data connection fail)
  • FOTA (Firmware Over The Air) i Firmware over the air solution. Device firmware can be updated from server.
  • Event reporting (via Email/SMS) i Device can send email or SMS if configured event happened
  • Integrated speed test i Device has integrated speed test functionality
  • Network Scanner with Topology display i Device can scan network topology (both LAN and WAN) and display it graphically
  • Disable Roaming i Device can be configured to not use mobile data while its in roaming
  • SMS gateway i Device has: HTTP Post/Get, Email to SMS, Scheduled SMS, SMS Forwarding and SMPP functionalities
  • OSPF i Open Shortest Path First (OSPF) is a routing protocol for Internet Protocol (IP) networks. It uses a link state routing (LSR) algorithm and falls into the group of interior routing protocols, operating within a single autonomous system (AS).
  • Access control safety i Access to the device can changed to different TCP port or be enabled/disabled.
  • SIM Idle protection i Device can periodically switch to secondary SIM card to prevent operator from disabling SIM card
  • VLAN i A virtual LAN (VLAN 802.1Q) is any broadcast domain that is partitioned and isolated in a computer network at the data link layer (OSI layer 2)
  • CLI i CLI (command-line interface) allows user to use linux commands for router configuration
  • Firewall i Device has configurable firewall (Port forwarding, traffic rules)
  • IP/MAC filter i Device can block devices with certain MAC addresses or allow connect only those devices, which MAC addresses are in the MAC list
  • TR-069 i TR-069 (Technical Report 069) is a technical specification that defines an application layer protocol for remote management of end-user devices
  • DHCP server i The Dynamic Host Configuration Protocol (DHCP) is a network protocol used to assign IP addresses and provide configuration information to devices such as servers, desktops, or mobile devices, so they can communicate on a network using the Internet Protocol (IP)
  • Dynamic DNS i Dynamic DNS (DDNS) is a domain name service allowing to link dynamic IP addresses to static hostname.
  • RMS support i Device supports Teltonika's RMS (Remote Mangement System)

Key Features

  • LTE up to 100 Mbps DL and 50 Mbps UL
  • DC-HSPA+ up to 42 Mbps DL and 5.73 Mbps UL
  • Multiple LTE FDD bands
  • IEEE 802.11b/g/n WiFi with 2×2 MIMO up to 300 Mbps
  • OpenVPN, PPTP, L2TP, IPsec, VRRP, GRE Tunnel
  • SMS Control, WiFi Hotspot, Mobile on Demand, Backup WAN
  • Input Triggers, Samba Share, GPS
  • Four Ethernet ports
  • 3 x input, 2 x output ports
  • MicroSD card slot
  • 4 pin industrial socket for 2/4 wire RS485
  • DB9 socket for full-featured RS232
  • USB type-A socket for external devices
  • Durable aluminum housing
  • External antennas
  • Dual SIM
  • Dual FW image


This product partly contains open source software. For more information please click here.