FM6320

FM6320 – 3G, RS232/RS485, CAN J1708 and J1939

Heavy transport tracking device on 3G networks

Technology
  • SMS
  • GPRS
  • GNSS
  • 3G
Hardware
  • K-Line
  • Micro SD
  • RS485
  • CAN J1708
Firmware
  • Profiles
  • Transparent mode (RS232)
  • DDD download and Tacho online data
  • LV-CAN support

Compare products
(Compare 2 or up to 4 products)

Product Description

Dual SIM

With Dual SIM functionality, you will receive data even if your main SIM card fails to connect.

micro sd card

Micro SD card

Don’t lose any records with micro SD card up to 32 GB! FM6320 will store all data in micro SD card when driving in areas where 3G/GSM is not available.

tacho

Integrated tachograph solution

Integrated tachograph solution enables remote tachograph file (DDD, V1B, C1B or TGD format) download and live tachograph info acquisition without any additional adapter. Easier than ever connection – less integration time.

SMS

Dynamic SMS events

Get all most important event info in one SMS message! Dynamic SMS feature provides the time of event, type of event, event state, location coordinates and even Quality of GNSS reception.

gnss

GNSS antenna disconnection detection

GNSS antenna disconnection detection will monitor the state of GNSS antenna. If any person cuts or disconnects the antenna, You will be immediately informed about such action.

module

New GNSS module

With new integrated GNSS module, Your tracking experience will be better than ever before. Even higher sensitivity, faster than ever cold start and almost instant hot start ensures that Your fleet will be tracked precisely.

can

J1708 CAN support

Read fuel data from heavy duty vehicles, from which fuel data reading was not possible before. J1708 CAN protocol ensures fuel data reading from Volvo and Renault heavy duty vehicles.

FM63201O5YSC* package contains

  • FM6320 tracker.
  • 3G/GSM antenna (3.0 m).
  • GNSS antenna (3.0 m).
  • Input/output power supply cable (0.9 m).
  • Mini USB – USB cable (0.8 m).
  • Port ½ cable (1.5 m).
  • Port3 cable (1.5 m).

* SAMPLES ordering code – applied for orders up to 7 pcs.

FM63201O5Y01* package contains

  • FM6320 tracker.
  • 3G/GSM antenna (3.0 m).
  • GNSS antenna (3.0 m).
  • Input/output power supply cable (0.9 m).
  • Mini USB – USB cable (0.8 m).
  • Port ½ cable (1.5 m).
  • Port3 cable (1.5 m).

* MASS PACKAGING – for bigger quantity orders, with configuration cables included (max 100 pcs.).

FM63201O3O01* package contains

  • FM6320 tracker.
  • 3G/GSM antenna (3.0 m).
  • GNSS antenna (3.0 m).
  • Input/output power supply cable (0.9 m).

* MASS PACKAGING – for bigger quantity orders, configuration cable not included.

 

  • TECHNOLOGY

  • 3G i 3G is the third generation of wireless mobile telecommunications technology.
  • GNSS i Global positiong system/Global Navigation Satellite System.
  • GPRS i General Packet Radio Service (GPRS) is a packet oriented mobile data service based on the 2G technology.
  • SMS i Short Message Service (SMS) is a text messaging service component.
  • HARDWARE

  • External GSM antenna i An antenna used for GSM connectivity. Connected to FM device via external connector.
  • External GNSS antenna i An antenna used for GPS connectivity. Connected to FM device via external connector.
  • CAN J1939 i SAE J1939 is the vehicle bus standard used for communication and diagnostics among vehicle components
  • CAN J1708 i SAE J1708 is a standard used for serial communications between ECUs on a heavy duty vehicle and also between a computer and the vehicle
  • RS232 –2 i RS-232 is a standard for serial communication transmission of data
  • RS485 –1 i RS-485 is a standard defining the electrical characteristics of drivers and receivers for use in serial communications systems
  • DIN – digital input –4 i Digital Inputs allow device to detect logic states 1 (enabled) or 0 (disabled).
  • AIN - analog input –3 i An analog input converts a voltage level into a digital value that can be stored and processed in device.
  • DOUT –4 i Digital Outputs allow device to output logic states 1 (makes a circuit) and 0 (cuts the circuit).
  • 1-Wire® –1 i 1-Wire® is a device communications bus system that provides low-speed data, signaling, and power over a single conductor.
  • Accelerometer i Accelerometer allows the device to indicate if vehicle is
    moving or not, as well as measure acceleration.
  • Battery –550mAh Ni-MH 8,4V i Allows device to work without external power source
  • IP41 i Protected from tools and small wires, condensation.
  • 1MB memory i Internal memory for records storing when there is no GPRS connectivity.
  • Micro SD i Micro SD card slot for records storing when there is no GPRS connectivity.
  • 10 - 30V i External voltage range
  • K-Line i Allows reading vehicle data
  • Overvoltage protection i Protects device from voltage jumps till 90V
  • 1x SIM Card i Allows to put 1 SIM card for internet connection
  • USB 2.0 Interface i Device accessible and configurable via USB
  • FIRMWARE

  • LV-CAN support i LV-CAN200 is used to listen data from light vehicles. With this adapter FM device is able to collect and send such data.
  • Ignition detection i A vehicle ignition detection function, based on a configured ignition source (External power voltage, Digital input 1 or Movement).
  • Geo-fence i A functionality, which generates an event when crossing a defined area. It can be used to detect wherever car enters or leaves customized areas
  • Sleep/Deep sleep i Working modes which let FM device to reduce power consumption and save vehicle battery.
    - In sleep mode, FM device turns GNSS module off and it is not saving or sending new periodic data records.
    - In deep sleep mode, FM device sets GNSS receiver to sleep mode and turns off GSM/GPRS module, although periodic records with last known coordinate are being saved and sent to server.
  • Overspeeding detection i This scenario helps to prevent from exceeding fixed speed and inspects driver if needed. Digital output 1 is controlled by scenario for user needs, to manage buzzer, LED etc. During overspeeding event Digital output 1 will be turning ON and OFF until speed is lower than configured Max Allowed Speed.
  • FOTA i Firmware over the air solution. The software is used to send firmware/configuration to FM device via GPRS network.
  • Remote Log i This type of FM data logging is used when there is no possibility to connect to device physically. Device establishes GPRS connection and activates link to server, log is started to stream to server until set time is elapsed.
  • Garmin i Garmin provides a Fleet Management Interface Tool Kit, which connected to FM device via RS232 interface enables the driver to have a in their vehicle for real-time navigation, messaging, and job dispatch capabilities to help them be more efficient.
  • GPRS commands i It is possible to send commands to FM device using GPRS. GPRS commands can be used for sending configuration, debug, digital outputs control commands etc. These commands should be coded into a special codec12 format.
  • RFID RS232 i Radio-frequency identification (RFID) is the use of a wireless non-contact system to transfer data from a tag attached to an object, for the automatic driver identification. Reader can be connected to FM device via RS232 interface.
  • RFID 1-Wire® i Radio-frequency identification (RFID) is the use of a wireless non-contact system to transfer data from a tag attached to an object, for the automatic driver identification. Reader can be connected to FM device via 1-wire interface.
  • iButton 1-Wire® i iButton is a special driver identification chip based on 1-wire protocol. External 1-wire iButton reader can be used in parallel with FM devices
  • Temp. 1-Wire® i A temperature sensor which can be connected to FM device and provide information via 1-wire data protocol.
  • Immobilizer i With this scenario vehicle can be used only if iButton is connected. You can connect any iButton to pass Immobilizer security. FM device Digital Output 2 is controlled by scenario for user needs (for example: LED, buzzer or other indicator can be connected).
  • Eco driving i This scenario helps to prevent and inspect driver about harsh driving. Eco driving scenario continuously monitors: accelerating, braking and cornering forces depending on build in accelerometer. Monitoring sensitivity is configurable.
    FM device Digital Output 1 is controlled by scenario for user needs, buzzer or LED for example.
  • Green driving i Helps to prevent and inspect driver about harsh driving. This functionality works in parallel with accelerating force, braking force and cornering angles. Every harsh drive event can be presented in the real time during the LED or buzzer notification.
  • Fuel monitoring LLS i Fuel monitoring via LLS sensors gives ability to measurer are highly accurate fuel level in the vehicle. This functionality can be based on digital or analog connectivity.
  • Fuel monitoring CAN FMS i The FMS CAN line gives ability to read the vehicle fuel level parameters. This functionality works with J1939 or J1708 communication standards.
  • Fuel counter i Helps to monitor the fuel flow in the vehicle and transmit the dedicated data to the server.
  • DDD download and Tacho online data i Tachograph data download helps User to gather tachograph information remotely. The tachograph data is directly transmitted to the fleet management device via k-line connection
  • Anti-jamming detection i Jamming detection informs the driver with buzzer or LED about radio jamming events.
  • NTP time synch. i Network time protocol (NTP) is used to get the right time without GPS connection. This functionality gives an ability to monitor the device state in the real time.
  • GNSS unplug detection i The GNSS unplug detection gives an ability to notify the User about GNSS antenna disassembly.
  • Transparent mode (RS232) i The RS232 is a standard used for a serial communication between devices. While using RS232 connection various type of data like fuel parameters or messages can be transmitted.
  • SMS event i SMS event is a special functionality which is used to notify the user about the tracker initial state. Any changes of speed, engine status, over speeding or etc. will be informed with SMS.
  • Idling detection i The Idling detection functionality allows User to monitor the engine working time without initial speed.
  • Odometer i Odometer is used to calculate traveled distance and produce this information directly to server.
  • Trip detection i Trip detection is used to inform user about start and stop points in the dedicated location, while engine is on or off.
  • Profiles i Profiles configuration system gives an ability to configure the device with different behaviors. For example the device can change the profiles during the different operator code, engine working state or etc.
  • Integrated scenarios i The integrated device scenarios are used to simply enable the dedicate functionality like Green driving, Over speeding, Authorized driving or Immobilizer.
  • Remote configuration over SMS i The remote configuration via SMS gives an ability to configure the device via SMS
  • Offline tracking i Offline tracking is used to track the object position while GPRS is not activated.
  • Auto Geofencing i Auto geofencing can detect wherever car enters or leaves customized areas with deactivated ignition.

Technical details

GSM/GPRS/3G features:

  • UMTS/HSPA+, GSM/GPRS/EDGE module
  • UMTS/HSPA+ bands depending on module:
    • 800/850, 900, 1700, 1900, 2100 MHz (GLOBAL module)
    • 900 / 2100 MHz (EMEA / APAC module)
  • GSM/GPRS/EDGE bands depending on module:
    • 850, 900, 1800, 1900 MHz (GLOBAL module)
    • 900, 1800 (EMEA / APAC module)
  • HSPA+ data up to 21.0 Mbps downlink (GLOBAL module)
  • HSPA+ data up to 5.76 Mbps uplink (GLOBAL module)
  • HSPA+ data up to 7.2 Mbps downlink (EMEA / APAC module)
  • HSPA+ data up to 5.76 Mbps uplink (EMEA / APAC module)
  • UMTS uplink / downlink up to 384 Kbps
  • EDGE uplink up to 236.8 Kbps, downlink up to 296 Kbps
  • GPRS and EDGE class 33
  • SMS (text, data)

GNSS:

  • NMEA, GGA, GGL, GSA, GSV, RMC, VTG protocol compatible
  • 32 channel GNSS receiver
  • -162 dBm tracking Sensitivity

Interface:

  • Integrated KLINE
  • Dual CAN J1939
  • J1708 CAN
  • RS485 and 2x RS232 support
  • 4 Digital Inputs for object status monitoring
  • 4 Digital Open-collector Outputs (controlling external relays, LED, buzzers, etc.)
  • 3 Analog Inputs
  • 1-wire interface
  • Ni-Mh 550 mAh internal battery
  • MicroSD card
  • 2 status LED
  • Configuration and firmware update (via FOTA and USB cable)
  • External GSM antenna for higher sensitivity
  • External GNSS antenna for higher sensitivity

Features:

  • Integrated 3G/GSM module for worldwide usage even in countries where only 3G is available. Controlled switching between 3G and GSM networks.
  • Easy to mount and fasten firmly
  • 2 LED indication
  • Integrated Ni-MH back up battery
  • Real – Time tracking
  • External 3G/GSM antenna to ensure steady data stream while object is in low signal coverage areas
  • External GNSS antenna for high quality tracking at all-time even when object is in complex areas – from closed/urban streets or canyons to dense forests
  • Smart data acquisition based on:
    • Time
    • Distance
    • Angle
    • Speed difference (Value taken from GNSS or Teltonika Vehicle CAN adapters)
    • Ignition or any other I/O event
  • Saving information to Micro SD card, preventing data loss after prolonged time under no 3G/GSM coverage
  • Sending acquired data via 3G or GPRS (TCP/IP and UDP/IP protocols)
  • Virtual Odometer
  • Dual CAN J1939 reading enables DDD data files to be downloaded remotely
  • J1708 CAN reading interface
  • RS485 and 2x RS232 interfaces for advanced Fuel Level tracking or usage of external devices such as Garmin, LLS, RFID reader, etc.
  • Power saving in Sleep or Deep Sleep modes
  • Authorized driving with up to 500 unique iButton ID list
  • Time synchronization by NTP (Network Time Protocol) if GNSS signal is absent
  • SMS sending/receiving via GPRS
  • Time-zone (UTC/GMT) selection
  • Dynamic SMS events
  • Teltonika Vehicle Can Adapter

Accessories/features:

  • Fuel monitoring with LLS sensors
  • Ignition detection
  • Up to 4x 1-wire Temp sensors
  • 1-wire iButtons
  • Door sensors
  • LED indication
  • Buzzer
  • Internal backup battery
  • CAN interface
  • Remote Tachograph DDD file download
  • RS485 and 2x RS232 for peripheral device support
  • GARMIN FMI support
  • Alarm button
  • Relay
    • Engine block
    • Starter block
  • Trip detection
  • Overspeeding detection
  • Auto Geofencing
    • Detect car towing
    • Car theft prevention
  • 5x LLS support
  • RFID (RS232 and 1Wire interface) support
  • Four profiles

Downloads