FM5500 - RS232/RS485, 2xSIM, CAN bus

FM5500 – RS232/RS485, 2xSIM, CAN bus

Advanced GLONASS/GPS/GALILEO/GSM Terminal for high-end applications

Technology
  • SMS
  • GPRS
  • GNSS
Hardware
  • 2x SIM Card (Dual-SIM)
  • RS485
  • RS232
  • CAN J1939
Firmware
  • Profiles
  • Transparent mode (RS232)
  • LV-CAN support

Compare products
(Compare 2 or up to 4 products)

Product Description

  • Dual SIM
  • Transparent mode via RS232 and RS485
  • Up to 5 digital and 4 analog fuel level sensors
  • Garmin functionality ( messaging, destinations, ETA)
  • FMS support (CAN bus data j1939)

FM5500 Scheme

FM55XMN2Z6SC* package contains

  • FM5500 tracker.
  • GSM antenna (3.0 m).
  • GPS/GLONASS antenna (3.0 m).
  • Input/output power supply cable (0.9 m).
  • Mini USB – USB cable (0.8 m).
  • Port ½ cable (1.5 m).
  • Port3 cable (1.5 m).

* SAMPLES ordering code – applied for orders up to 7 pcs.

FM55XMN2H101* package contains

  • FM5500 tracker.
  • GSM antenna (3.0 m).
  • GPS/GLONASS antenna (3.0 m).
  • Input/output power supply cable (0.9 m).
  • Mini USB – USB cable (0.8 m).

* MASS PACKAGING – for bigger quantity orders, with configuration cable included.

FM55XMN2C201* package contains

  • FM5500 tracker.
  • GSM antenna (3.0 m).
  • GPS/GLONASS antenna (3.0 m).
  • Input/output power supply cable (0.9 m).

* MASS PACKAGING – for bigger quantity orders, configuration cable not included.

  • TECHNOLOGY

  • GNSS i Global positiong system/Global Navigation Satellite System.
  • GPRS i General Packet Radio Service (GPRS) is a packet oriented mobile data service based on the 2G technology.
  • SMS i Short Message Service (SMS) is a text messaging service component.
  • HARDWARE

  • External GSM antenna i An antenna used for GSM connectivity. Connected to FM device via external connector.
  • External GNSS antenna i An antenna used for GPS connectivity. Connected to FM device via external connector.
  • CAN J1939 i SAE J1939 is the vehicle bus standard used for communication and diagnostics among vehicle components
  • RS232 –2 i RS-232 is a standard for serial communication transmission of data
  • RS485 –1 i RS-485 is a standard defining the electrical characteristics of drivers and receivers for use in serial communications systems
  • RJ4 (audio)
  • DIN – digital input –4 i Digital Inputs allow device to detect logic states 1 (enabled) or 0 (disabled).
  • AIN - analog input –4 i An analog input converts a voltage level into a digital value that can be stored and processed in device.
  • DOUT –4 i Digital Outputs allow device to output logic states 1 (makes a circuit) and 0 (cuts the circuit).
  • 1-Wire® –1 i 1-Wire® is a device communications bus system that provides low-speed data, signaling, and power over a single conductor.
  • Accelerometer i Accelerometer allows the device to indicate if vehicle is
    moving or not, as well as measure acceleration.
  • Battery –550mAh Ni-MH 8,4V i Allows device to work without external power source
  • IP41 i Protected from tools and small wires, condensation.
  • 16MB memory i Internal memory for records storing when there is no GPRS connectivity.
  • 10 - 30V i External voltage range
  • Overvoltage protection i Protects device from voltage jumps till 90V
  • 2x SIM Card (Dual-SIM) i Allows to put 2 SIM cards (can be from different operators) for internet connection
  • USB 2.0 Interface i Device accessible and configurable via USB
  • FIRMWARE

  • LV-CAN support i LV-CAN200 is used to listen data from light vehicles. With this adapter FM device is able to collect and send such data.
  • Ignition detection i A vehicle ignition detection function, based on a configured ignition source (External power voltage, Digital input 1 or Movement).
  • Geo-fence i A functionality, which generates an event when crossing a defined area. It can be used to detect wherever car enters or leaves customized areas
  • Sleep/Deep sleep i Working modes which let FM device to reduce power consumption and save vehicle battery.
    - In sleep mode, FM device turns GNSS module off and it is not saving or sending new periodic data records.
    - In deep sleep mode, FM device sets GNSS receiver to sleep mode and turns off GSM/GPRS module, although periodic records with last known coordinate are being saved and sent to server.
  • Overspeeding detection i This scenario helps to prevent from exceeding fixed speed and inspects driver if needed. Digital output 1 is controlled by scenario for user needs, to manage buzzer, LED etc. During overspeeding event Digital output 1 will be turning ON and OFF until speed is lower than configured Max Allowed Speed.
  • FOTA i Firmware over the air solution. The software is used to send firmware/configuration to FM device via GPRS network.
  • Remote Log i This type of FM data logging is used when there is no possibility to connect to device physically. Device establishes GPRS connection and activates link to server, log is started to stream to server until set time is elapsed.
  • Garmin i Garmin provides a Fleet Management Interface Tool Kit, which connected to FM device via RS232 interface enables the driver to have a in their vehicle for real-time navigation, messaging, and job dispatch capabilities to help them be more efficient.
  • GPRS commands i It is possible to send commands to FM device using GPRS. GPRS commands can be used for sending configuration, debug, digital outputs control commands etc. These commands should be coded into a special codec12 format.
  • RFID RS232 i Radio-frequency identification (RFID) is the use of a wireless non-contact system to transfer data from a tag attached to an object, for the automatic driver identification. Reader can be connected to FM device via RS232 interface.
  • RFID 1-Wire® i Radio-frequency identification (RFID) is the use of a wireless non-contact system to transfer data from a tag attached to an object, for the automatic driver identification. Reader can be connected to FM device via 1-wire interface.
  • iButton 1-Wire® i iButton is a special driver identification chip based on 1-wire protocol. External 1-wire iButton reader can be used in parallel with FM devices
  • Temp. 1-Wire® i A temperature sensor which can be connected to FM device and provide information via 1-wire data protocol.
  • Immobilizer i With this scenario vehicle can be used only if iButton is connected. You can connect any iButton to pass Immobilizer security. FM device Digital Output 2 is controlled by scenario for user needs (for example: LED, buzzer or other indicator can be connected).
  • Eco driving i This scenario helps to prevent and inspect driver about harsh driving. Eco driving scenario continuously monitors: accelerating, braking and cornering forces depending on build in accelerometer. Monitoring sensitivity is configurable.
    FM device Digital Output 1 is controlled by scenario for user needs, buzzer or LED for example.
  • Green driving i Helps to prevent and inspect driver about harsh driving. This functionality works in parallel with accelerating force, braking force and cornering angles. Every harsh drive event can be presented in the real time during the LED or buzzer notification.
  • Fuel monitoring LLS i Fuel monitoring via LLS sensors gives ability to measurer are highly accurate fuel level in the vehicle. This functionality can be based on digital or analog connectivity.
  • Fuel monitoring CAN FMS i The FMS CAN line gives ability to read the vehicle fuel level parameters. This functionality works with J1939 or J1708 communication standards.
  • Fuel counter i Helps to monitor the fuel flow in the vehicle and transmit the dedicated data to the server.
  • Anti-jamming detection i Jamming detection informs the driver with buzzer or LED about radio jamming events.
  • Transparent mode (RS232) i The RS232 is a standard used for a serial communication between devices. While using RS232 connection various type of data like fuel parameters or messages can be transmitted.
  • Odometer i Odometer is used to calculate traveled distance and produce this information directly to server.
  • Trip detection i Trip detection is used to inform user about start and stop points in the dedicated location, while engine is on or off.
  • Profiles i Profiles configuration system gives an ability to configure the device with different behaviors. For example the device can change the profiles during the different operator code, engine working state or etc.
  • Integrated scenarios i The integrated device scenarios are used to simply enable the dedicate functionality like Green driving, Over speeding, Authorized driving or Immobilizer.
  • Remote configuration over SMS i The remote configuration via SMS gives an ability to configure the device via SMS
  • Offline tracking i Offline tracking is used to track the object position while GPRS is not activated.
  • Auto Geofencing i Auto geofencing can detect wherever car enters or leaves customized areas with deactivated ignition.

Technical details

GSM/GPRS:

  • Quad-band 900/1800 MHz; 850/1900 MHz
  • GPRS class 10 (up to 85,6 kbps)
  • SMS (text/data)

GPS/GLONASS:

  • NMEA-0183 protocol
  • 32 channel receiver
  • High sensitivity, not less than -160 dBm

Interface:

  • 4 Digital Inputs for object status monitoring
  • 4 Analog Inputs (switchable 10 V or 30 V range, 12 bit resolution)
  • 4 Digital Open-collector Outputs (controlling external relays, LED, buzzers, etc.)
  • 1-Wire® interface protocol
  • CAN interface
  • Power supply (+10…+30) V DC
  • 2 Status LEDs
  • USB interface
  • 2x RS232 ports
  • Configuration and firmware update (OTA and via USB cable)
  • External GSM antenna
  • External GNSS antenna
  • Optional internal (or external) rechargeable battery with charge controller
  • Voice interface
  • RS485 interface
  • Integrated automotive power protection, compatible with ISO 7637-2 standard

Features:

  • 2 SIM Compatibility
  • Up to 45 000 records can be stored on flash memory
  • GPS/GLONASS coordinates and I/O data acquisition
  • Real Time tracking
  • Smart algorithm of data acquisition (time, distance, angle, ignition and event based)
  • Sending acquired data via GPRS (TCP/IP and UDP/IP protocols)
  • Smart algorithm of GPRS connections (GPRS traffic saving)
  • Operating in roaming networks (configurable GSM providers list)
  • Events on I/O detection and sending via GPRS or SMS
  • Scheduled 24 coordinates SMS sending
  • Multi geofence zones (rectangle or circle)
  • Deep Sleep mode (saving vehicle‘s accumulator)
  • FOTA (firmware updating via GPRS)
  • Accelerometer
  • Small and easy to mount case
  • Roaming dependant operation (GPRS traffic saving in roaming zones)
  • Harsh driving detection (harsh braking, harsh acceleration and harsh cornering)
  • Operation mode presets
    • Over Speeding Detection
    • Driver behavior monitoring (acceleration/breaking/cornering notification)
    • Driver identification (1-Wire® iButton ID key)
  • GPRS commands *
  • External RS232 peripherial device support: *
    • GARMIN FMI support
    • 2x LLS support
    • RFID protocol support

* – available from 01.xx.xx firmware

FM5500 versions:

GPS only modification
GPS/GLONASS modification

Downloads