FM3620

FM3620

FM3620 – 3G GNSS external antennas with high capacity backup battery

Technology
  • SMS
  • GPRS
  • GNSS
  • 3G
Hardware
  • Battery
  • 1-Wire®
  • AIN - analog input
  • External GNSS antenna
Firmware
  • NTP time synch.
  • LV-CAN support

Compare products
(Compare 2 or up to 4 products)

Product Description

  • Telit 3G modem for worldwide connectivity
  • 500 authorized iButton list
  • NTP time synchronization (in places where GPS is not available)
  • LV-CAN200 support
  • High capacity Internal backup battery

FM3620 Scheme

FM3620SLG5SC (2xOUT, AIN/DIN mod)* package contains

  • FM3620 tracker.
  • Mini USB – USB cable (0.8 m).
  • 3G/GSM antenna (3.0 m).
  • GNSS antenna (3.0 m).
  • Input/output power supply cable (0.9 m).

* SAMPLES ordering code – applied for orders up to 7 pcs.

FM3620SLG501 (2xOUT, AIN/DIN mod)* package contains

  • FM3620 tracker.
  • Mini USB – USB cable (0.8 m).
  • 3G/GSM antenna (3.0 m).
  • GNSS antenna (3.0 m).
  • Input/output power supply cable (0.9 m).

* MASS PACKAGING – for bigger quantity orders, with configuration cable included.

FM3620SLEC01 (2xOUT, AIN/DIN mod)* package contains

  • FM3620 tracker.
  • 3G/GSM antenna (3.0 m).
  • GNSS antenna (3.0 m).
  • Input/output power supply cable (0.9 m).

* MASS PACKAGING – for bigger quantity orders, configuration cable not included.

FM3620WLG5SC (OUT, AIN/DIN, 1 wire mod)* package contains

  • FM3620 tracker.
  • Mini USB – USB cable (0.8 m).
  • 3G/GSM antenna (3.0 m).
  • GNSS antenna (3.0 m).
  • Input/output power supply cable (0.9 m).

* SAMPLES ordering code – applied for orders up to 7 pcs.

FM3620WLG5SC (OUT, AIN/DIN, 1 wire mod)* package contains

  • FM3620 tracker.
  • Mini USB – USB cable (0.8 m).
  • 3G/GSM antenna (3.0 m).
  • GNSS antenna (3.0 m).
  • Input/output power supply cable (0.9 m).

* MASS PACKAGING – for bigger quantity orders, with configuration cable included.

FM3620WLEC01 (OUT, AIN/DIN, 1 wire mod)* package contains

  • FM3620 tracker.
  • 3G/GSM antenna (3.0 m).
  • GNSS antenna (3.0 m).
  • Input/output power supply cable (0.9 m).

* MASS PACKAGING – for bigger quantity orders, configuration cable not included.

  • TECHNOLOGY

  • 3G i 3G is the third generation of wireless mobile telecommunications technology.
  • GNSS i Global positiong system/Global Navigation Satellite System.
  • GPRS i General Packet Radio Service (GPRS) is a packet oriented mobile data service based on the 2G technology.
  • SMS i Short Message Service (SMS) is a text messaging service component.
  • HARDWARE

  • External GSM antenna i An antenna used for GSM connectivity. Connected to FM device via external connector.
  • External GNSS antenna i An antenna used for GPS connectivity. Connected to FM device via external connector.
  • DIN – digital input –0/1* i Digital Inputs allow device to detect logic states 1 (enabled) or 0 (disabled).
  • AIN - analog input –0/1* i An analog input converts a voltage level into a digital value that can be stored and processed in device.
  • DOUT –1/2* i Digital Outputs allow device to output logic states 1 (makes a circuit) and 0 (cuts the circuit).
  • 1-Wire® –0/1* i 1-Wire® is a device communications bus system that provides low-speed data, signaling, and power over a single conductor.
  • Accelerometer i Accelerometer allows the device to indicate if vehicle is
    moving or not, as well as measure acceleration.
  • Battery –1800mAh Li-poly 3,7V i Allows device to work without external power source
  • IP41 i Protected from tools and small wires, condensation.
  • 1MB memory i Internal memory for records storing when there is no GPRS connectivity.
  • 10 - 30V i External voltage range
  • Overvoltage protection i Protects device from voltage jumps till 90V
  • 1x SIM Card i Allows to put 1 SIM card for internet connection
  • USB 2.0 Interface i Device accessible and configurable via USB
  • FIRMWARE

  • LV-CAN support i LV-CAN200 is used to listen data from light vehicles. With this adapter FM device is able to collect and send such data.
  • Ignition detection i A vehicle ignition detection function, based on a configured ignition source (External power voltage, Digital input 1 or Movement).
  • Geo-fence i A functionality, which generates an event when crossing a defined area. It can be used to detect wherever car enters or leaves customized areas
  • Sleep/Deep sleep i Working modes which let FM device to reduce power consumption and save vehicle battery.
    - In sleep mode, FM device turns GNSS module off and it is not saving or sending new periodic data records.
    - In deep sleep mode, FM device sets GNSS receiver to sleep mode and turns off GSM/GPRS module, although periodic records with last known coordinate are being saved and sent to server.
  • Overspeeding detection i This scenario helps to prevent from exceeding fixed speed and inspects driver if needed. Digital output 1 is controlled by scenario for user needs, to manage buzzer, LED etc. During overspeeding event Digital output 1 will be turning ON and OFF until speed is lower than configured Max Allowed Speed.
  • FOTA i Firmware over the air solution. The software is used to send firmware/configuration to FM device via GPRS network.
  • Remote Log i This type of FM data logging is used when there is no possibility to connect to device physically. Device establishes GPRS connection and activates link to server, log is started to stream to server until set time is elapsed.
  • GPRS commands i It is possible to send commands to FM device using GPRS. GPRS commands can be used for sending configuration, debug, digital outputs control commands etc. These commands should be coded into a special codec12 format.
  • RFID 1-Wire® i Radio-frequency identification (RFID) is the use of a wireless non-contact system to transfer data from a tag attached to an object, for the automatic driver identification. Reader can be connected to FM device via 1-wire interface.
  • iButton 1-Wire® i iButton is a special driver identification chip based on 1-wire protocol. External 1-wire iButton reader can be used in parallel with FM devices
  • Temp. 1-Wire® i A temperature sensor which can be connected to FM device and provide information via 1-wire data protocol.
  • Immobilizer i With this scenario vehicle can be used only if iButton is connected. You can connect any iButton to pass Immobilizer security. FM device Digital Output 2 is controlled by scenario for user needs (for example: LED, buzzer or other indicator can be connected).
  • Green driving i Helps to prevent and inspect driver about harsh driving. This functionality works in parallel with accelerating force, braking force and cornering angles. Every harsh drive event can be presented in the real time during the LED or buzzer notification.
  • Anti-jamming detection i Jamming detection informs the driver with buzzer or LED about radio jamming events.
  • NTP time synch. i Network time protocol (NTP) is used to get the right time without GPS connection. This functionality gives an ability to monitor the device state in the real time.
  • GNSS unplug detection i The GNSS unplug detection gives an ability to notify the User about GNSS antenna disassembly.
  • SMS event i SMS event is a special functionality which is used to notify the user about the tracker initial state. Any changes of speed, engine status, over speeding or etc. will be informed with SMS.
  • Odometer i Odometer is used to calculate traveled distance and produce this information directly to server.
  • Trip detection i Trip detection is used to inform user about start and stop points in the dedicated location, while engine is on or off.
  • Integrated scenarios i The integrated device scenarios are used to simply enable the dedicate functionality like Green driving, Over speeding, Authorized driving or Immobilizer.
  • Remote configuration over SMS i The remote configuration via SMS gives an ability to configure the device via SMS
  • Offline tracking i Offline tracking is used to track the object position while GPRS is not activated.
  • Auto Geofencing i Auto geofencing can detect wherever car enters or leaves customized areas with deactivated ignition.

Technical details

GSM/GPRS/3G features:

  • UMTS/HSPA+, GSM/GPRS/EDGE module
  • UMTS/HSPA+ bands:
    • HE910-D 850/900/1700/1900/2100 MHZ
  • HSPA+ uplink up to 5,76 Mbps, downlink up to 21 Mbps
  • UMTS Uplink/Downlink up to 384 Kbps
  • EDGE uplink up to 236.8 Kbps, downlink up to 296 Kbps
  • GPRS and EDGE class 33
  • SMS (text, data)

GNSS:

  • NMEA, GGA, GGL, GSA, GSV, RMC, VTG protocol compatible
  • 32 channel GNSS receiver
  • -162 dBm tracking Sensitivity

Interface:

  • 10 – 30 V input
  • C1 hardware modification:
    • 1 Digital Input
    • 1 Universal Digital/Analog input
    • 2 Digital outputs
  • C2 hardware modification:
    • 1 Universal Digital/Analog input
    • 1-Wire interface
    • 1 Digital output
  • High capacity Internal backup battery
  • 3 Status LEDs
    • Navigate
    • Status
    • Modem
  • Internal USB Port
  • Configuration and firmware upload (FOTA and via USB cable)
  • External GSM antenna for higher sensitivity
  • External GNSS antenna for higher sensitivity

* – Available on C2 hardware modification

Features:

  • Integrated 3G/GSM module makes this device usable worldwide, as there are countries which have only 3G network. User can choose if device will work only in GSM network, or it will prefer 3G network and switch to GSM only then 3G is absent
  • Small and easy to mount case
  • Real-time tracking
  • Smart data acquisition – based on time, distance, angle, ignition and I/O events allow to have precise online track
  • Sending acquired data via 3G or GPRS (TCP/IP and UDP/IP protocols)
  • Smart algorithm of 3G or GPRS connections (GPRS traffic saving)
  • Operating in roaming networks by preferred GSM providers list
  • Events on I/O detection and sending via 3G,GPRS or SMS
  • Scheduled 24 coordinates SMS sending when GPRS is not available
  • 5 geofence zones (rectangular or circle)
  • Auto Geofencing crested for car towing detection and car theft prevention
  • DeepSleep mode (less than 4 mA power consumption)
  • FOTA (firmware updating via GSM/3G)
  • 3 operational modes (Home, Roaming, Unknown) based on operator
  • Integrated scenarios:
    • Over speeding to secure driver and prevent penalties
    • Trip start and end detection
    • Authorized driving (1-Wire® iButton ID keys up to 50 iButton keys) use to prevent stealing or indicate drivers*
    • Immobilizer function*

Accessories/features:

  • Ignition detection
  • Door sensors
  • LED indication
  • Buzzer
  • Internal backup battery
  • Alarm button
  • 1-wire iButtons*
  • 1-wire Temperature sensor*
  • Relay
    • Engine block
    • Starter block
  • Trip detection
  • Overspeeding detection
  • Auto Geofencing
    • Detect car towing
    • Car theft prevention

Downloads