FM1010
FM1010FM1010FM1010

FM1010 – basic OBDII tracking unit

Easy Plug & Play vehicle tracker

Technology
  • RF
  • SMS
  • GPRS
  • GNSS
Hardware
  • Battery
  • OBD II connector
  • Internal GNSS antenna
Firmware
  • Towing detection
  • Private/business trip
  • Crash detection
  • Idling detection

Compare products
(Compare 2 or up to 4 products)

Product Description

Easy Plug & Play vehicle tracker

  • OBDII connection, easy mounting
  • Driving quality monitoring scenarios
  • Trip start and stop detection
  • Crash detection
  • Internal backup battery

FM1010 Scheme

FM1010T0WE01 new standard mass package contains:

  • 20 pcs. FM1010 trackers.
FM10XY packagingNew mass packaging for Teltonika FM products FM10XY packaging

FM1010T0TMSC* package contains

  • FM1010 tracker.
  • Mini USB – USB cable (0.8 m).
  • Power supply cable (0.25 m).

* SAMPLES ordering code – applied for orders up to 7 pcs.

FM1010T0TM01* package contains

  • FM1010 tracker.
  • Mini USB – USB cable (0.8 m).
  • Power supply cable (0.25 m).

* For single packaging orders, configuration cable not included.

FM1010T0KC01* package contains

  • FM1010 tracker.

* For single packaging orders, configuration cable not included.

  • TECHNOLOGY

  • GNSS i Global positiong system/Global Navigation Satellite System.
  • GPRS i General Packet Radio Service (GPRS) is a packet oriented mobile data service based on the 2G technology.
  • SMS i Short Message Service (SMS) is a text messaging service component.
  • RF i Radio frequency
  • HARDWARE

  • Internal GSM antenna i An antenna used for GSM connectivity. Integrated into FM device PCB. Does not have external connector.
  • Internal GNSS antenna i An antenna used for GPS connectivity. Integrated into FM device PCB. Does not have external connector.
  • OBD II connector i Allows to connect the tracker to vehicle OBDII port
  • DIN – digital input –1 i Digital Inputs allow device to detect logic states 1 (enabled) or 0 (disabled).
  • Accelerometer i Accelerometer allows the device to indicate if vehicle is
    moving or not, as well as measure acceleration.
  • Battery –170mAh Li-ion 3,7V i Allows device to work without external power source
  • IP41 i Protected from tools and small wires, condensation.
  • 1MB memory i Internal memory for records storing when there is no GPRS connectivity.
  • 10 - 16V i External voltage range
  • 1x SIM Card i Allows to put 1 SIM card for internet connection
  • USB 2.0 Interface i Device accessible and configurable via USB
  • FIRMWARE

  • Ignition detection i A vehicle ignition detection function, based on a configured ignition source (External power voltage, Digital input 1 or Movement).
  • Geo-fence i A functionality, which generates an event when crossing a defined area. It can be used to detect wherever car enters or leaves customized areas
  • Sleep/Deep sleep i Working modes which let FM device to reduce power consumption and save vehicle battery.
    - In sleep mode, FM device turns GNSS module off and it is not saving or sending new periodic data records.
    - In deep sleep mode, FM device sets GNSS receiver to sleep mode and turns off GSM/GPRS module, although periodic records with last known coordinate are being saved and sent to server.
  • Overspeeding detection i This scenario helps to prevent from exceeding fixed speed and inspects driver if needed. Digital output 1 is controlled by scenario for user needs, to manage buzzer, LED etc. During overspeeding event Digital output 1 will be turning ON and OFF until speed is lower than configured Max Allowed Speed.
  • FOTA i Firmware over the air solution. The software is used to send firmware/configuration to FM device via GPRS network.
  • Remote Log i This type of FM data logging is used when there is no possibility to connect to device physically. Device establishes GPRS connection and activates link to server, log is started to stream to server until set time is elapsed.
  • GPRS commands i It is possible to send commands to FM device using GPRS. GPRS commands can be used for sending configuration, debug, digital outputs control commands etc. These commands should be coded into a special codec12 format.
  • Green driving i Helps to prevent and inspect driver about harsh driving. This functionality works in parallel with accelerating force, braking force and cornering angles. Every harsh drive event can be presented in the real time during the LED or buzzer notification.
  • Anti-jamming detection i Jamming detection informs the driver with buzzer or LED about radio jamming events.
  • SMS event i SMS event is a special functionality which is used to notify the user about the tracker initial state. Any changes of speed, engine status, over speeding or etc. will be informed with SMS.
  • Idling detection i The Idling detection functionality allows User to monitor the engine working time without initial speed.
  • Crash detection i Crash detection functionality is generating the record when device detects car accident using the internal sensors (Accelerometer).
  • Odometer i Odometer is used to calculate traveled distance and produce this information directly to server.
  • Trip detection i Trip detection is used to inform user about start and stop points in the dedicated location, while engine is on or off.
  • Private/business trip i When Trip Event Private/Business enabled, possible trip values are sending to server with different identification number. The special radio frequency remote controller can be used to identify the different types of trip.
  • Towing detection i Towing detection feature helps to inform the User about car deporting. The quick event will be sent to server while towing is detected.
  • Integrated scenarios i The integrated device scenarios are used to simply enable the dedicate functionality like Green driving, Over speeding, Authorized driving or Immobilizer.
  • Remote configuration over SMS i The remote configuration via SMS gives an ability to configure the device via SMS
  • Offline tracking i Offline tracking is used to track the object position while GPRS is not activated.
  • Auto Geofencing i Auto geofencing can detect wherever car enters or leaves customized areas with deactivated ignition.

Technical details

GSM:

  • Quad-band 900/1800 MHz; 850/1900 MHz
  • GPRS class 10 (up to 85,6 kbps);
  • SMS (text/data)

GPS/GLONASS:

  • NMEA protocol compatible. Messages: GGA, GGL, GSA, GSV, RMC, VTG, TXT
  • 32 channel GPS/GLONASS receiver
  • Up to -161 dBm sensitivity

Interface:

  • 1 Digital Input Reserved for Ignition Status Monitoring (depends on vehicle type)
  • Accelerometer
  • Power supply (+10…+16) VDC
  • Integrated back-up battery (optional)
  • Internal High  Gain GSM antenna
  • Internal High  Gain GPS/GLONASS antenna
  • Dimensions: L(50,7mm)xW(49,6mm)xH(25mm)
  • 2 Status LEDs
  • USB Port
  • Configuration and firmware upload (FOTA and via USB cable)

Features:

  • Plug and Track
  • Small and easy to mount case – directly to car OBDII connector
  • Internal GSM antenna and Internal GPS/GLONASS antenna allow mount FM1010 much easier
  • Real Time tracking
  • Smart algorithm of data acquisition (time, distance, angle, ignition and event based)
  • Sending acquired data via GPRS (TCP/IP and UDP/IP protocols)
  • Smart algorithm of GPRS connections (GPRS traffic saving)
  • Operating in roaming networks (preferred GSM providers list)
  • Events on I/O detection and sending via GPRS or SMS.
  • Scheduled 24 coordinates SMS sending when GPRS not available
  • 5 geofence zones (rectangular or circle)
    • Auto  Geofencing  crested  for  car  towing  detection  and  car  theft  prevention
  • Deep Sleep mode (less than 2  mA power  consumption)
  • FOTA (firmware updating via GPRS)
  • 3  operational  modes (Home,  Roaming,  Unknown)  based  on  operator
  • Integrated  scenarios:
    • Over  speeding  to  secure  driver  and  prevent  penalties
    • Trip  start  and  end  detection
  • FM1010  supports  a  remote  logs  reading
    • FM1010  supports  remote  diagnostic  logs  functionality  using  GPRS.  Possible  issues  resolving  becomes faster .  Manufacturer  can  read  logs  remotely  using  SMS/GPRS  to  diagnose  the  FM1010  and  timely respond  to  the  fault.

Downloads